If you have a wired internet connection and you have to use your data packages on your phone then its time to save some money. You can turn your very own wired connection into WiFi hot-spot free of cost and you don't have to be a tech expert to do this. All you need is a Command Prompt with Administrative rights. If you don't have just ask your admin to do this.

Now if you are wondering that how this magic will happen than just see it happening and try these steps.

1.Open the run window by pressing "windows button + R" or by Click on Start-->Run.

2.Type 'cmd' in run box and press Enter or click Ok.

3. Type 'netsh wlan show drivers' in cmd and press enter to check whether your system supports Hosted Network or not.

If "Hosted Network Supported : Yes" this is appearing on the screen then continue with the next steps.

4.Now write 'cls' to clear the screen.

5.Write "netsh wlan set hostednetwork mode=allow ssid=HostName key=Password" in cmd.

HostName is the network name you want to have and Password is the security key of the network. You can write anything in these fields. This step will create your Hot-spot network but it is currently offline.

How to Convert your Laptop into WiFi HOTSPOT on Windows 7 & 8

6.Type "netsh wlan start hostednetwork" to start the virtual network you just created,This will change the network's status to Online.

After this all you have to do is to Share your internet with other networks and users.For this follow the next important points carefully.

7.Go to Control Panel then Network and Sharing Center.Click on Change Adapter Settings.


8.Right Click on the connection you are currently using(i.e:the one you used to create this virtual network).Select Properties and go to Sharing Tab.Check the box "Allow other network users to connect through this computer" and select your hotspot connection.

9.Click Ok to save it.

Thats it!Congratulations your network is now shared and you can get rid off from your slow mobile internet.

10.To stop this network just type "netsh wlan stop hostednetwork" in cmd. This will stop all hosted connections.

11.To see the status of the network just write "netsh wlan show hostednetwork" in cmd.

P.S: Never leave your network password free because it is vulnerable to the attackers and they might steal information.

0 comments:

Post a Comment

Thank You For Your Feedback......

 
App Tech © 2015-16. All Rights Reserved. Powered by Hamza
Top